Color

RGB vs CMYK vs Pantone

Understand color modes, why screen colors shift in print, and the export settings that keep flyers, banners and business cards looking right.

Emmanuel Oppong Kyekyeku

8 min read

Many designers have had this experience: a flyer looks bright and punchy on screen, then the printed copies come back looking dull and slightly muddy. Nothing is wrong with the printer. The problem is that screens and printers create color in completely different ways. Understanding RGB, CMYK and Pantone will save you reprints, arguments with clients and wasted money.

Key takeaways

  • RGB is for screens and CMYK is for ink on paper. They cannot show exactly the same colors.
  • Very bright screen colors often look duller in print because they fall outside the CMYK range.
  • Pantone (spot) colors are premixed inks used when an exact brand color matters.
  • Always set the right color mode before you start, and proof before a big print run.

RGB: color made from light

RGB stands for red, green and blue. Phones, monitors, TVs and projectors create color by shining these three colors of light in different amounts. It is called an additive model because adding all three at full strength gives white. Use RGB for anything that will be viewed on a screen: websites, social media posts, videos, presentations and app designs.

CMYK: color made from ink

CMYK stands for cyan, magenta, yellow and key (black). Printers lay tiny dots of these four inks on paper. It is a subtractive model, because each ink absorbs (subtracts) some of the light that would otherwise bounce back to your eyes. Use CMYK for flyers, brochures, business cards, posters and most commercial printing.

RGB: adds light (screens)Red + Green + BlueCMYK: subtracts light (ink on paper)Cyan + Magenta + Yellow (+ Black)
Additive RGB mixes light and moves toward white. Subtractive CMYK mixes ink and moves toward dark. Overlaps are simplified here.

Why bright colors look dull in print

The range of colors a system can produce is called its gamut. RGB screens have a larger gamut than standard CMYK printing. Colors that only exist in the RGB range, such as neon greens, electric blues and very saturated oranges, cannot be reproduced with ink, so the software picks the closest possible color. That closest color is usually duller.

RGB range (screens)CMYK range(print)Outside the print range:• Very bright, neon-like greens• Vivid electric blues• Intense oranges and purplesThese look duller when converted.
A simplified view of gamut. Colors in the outer zone are visible on screens but must be shifted when converted to CMYK.

Paper matters too. Glossy coated stock keeps colors brighter, while uncoated paper absorbs ink and looks softer. Screens also glow, which paper cannot do, so a printed color never has the same luminous quality.

What is Pantone?

Pantone is a color matching system. Instead of mixing cyan, magenta, yellow and black dots to approximate a color, a Pantone (or spot) color is a specific ink that is mixed in advance to a standard formula. Each has a code, such as PANTONE 185 C. Printers can then reproduce that exact color consistently.

Spot colors are used for:

  • Brand colors that must match exactly across packaging, uniforms and stationery.
  • Metallic and fluorescent inks that CMYK cannot create.
  • Jobs with only one or two colors, where spot inks can be cheaper and cleaner than full four-color printing.

Pantone has its own physical swatch books. The color you see on your screen is only an approximation, so if exact color matters, ask your printer for a swatch or a printed proof.

Quick comparison

RGBCMYKPantone / spot
Used forScreens and digitalStandard printingExact brand colors, special inks
Made fromRed, green, blue lightCyan, magenta, yellow, black inkOne premixed ink per color
Color rangeLargestSmallerVery accurate, limited to the chosen inks
Typical file settingsRGBCMYK (with a coated or uncoated profile)Spot color swatches

A safe workflow for print jobs

1Design in RGBKeep vivid colors while you work2Convert to CMYKCheck what shifts3Soft-proofPreview in your software4Print a testCompare on real paper
A four-step print workflow that avoids unpleasant surprises.
  1. Ask the printer first. They may give you a template, required bleed and a color profile.
  2. Set the document mode early. In Photoshop use Image > Mode > CMYK Color. In Illustrator or InDesign choose CMYK when creating the document. Starting in the right mode avoids surprise shifts.
  3. Soft-proof. Most design software can simulate the printed result on your screen, so you can see the shift before exporting.
  4. Use safe colors. If a color looks too bright to survive conversion, choose a slightly deeper version on purpose.
  5. Print a test. For large runs, ask for one proof copy on the real paper.
  6. Export correctly. A print PDF with bleed and embedded fonts is normally safer than a flattened JPG.

Black is not just black

Black causes more print surprises than any other color. In a CMYK file, the simplest black is 100 percent K (the black ink) with no other inks. It is perfect for small text, because only one plate needs to line up. But a large area of plain black can look slightly washed out or gray.

Plain blackC0 M0 Y0 K100Rich blacke.g. C60 M40 Y40 K100Best for small text and fine linesBest for large dark areasWhy it mattersPlain black can look slightlygray in big areas. Rich blackadds other inks for depth. Askyour printer for their preferredmix.
Two kinds of black for print. The values shown are a common example, not a universal standard.

For large dark backgrounds, many designers use a rich black, which adds some cyan, magenta and yellow under the black for a deeper result. Do not use rich black for small text, thin lines or fine details, because tiny misalignments between the inks can make the edges look blurry or colored. Printers also set a limit on the total amount of ink on one spot, often around 300 percent, to prevent smudging and slow drying. Ask your printer for their recommended mix.

Resolution: how many pixels do you need?

Color is only half of print quality. The other half is resolution. Screens display images at a relatively low pixel density, but print needs much more detail. The common standard for sharp printed images is 300 pixels per inch (PPI) at the final printed size.

Business card85 × 55 mm1004 × 650 pxA5 flyer148 × 210 mm1748 × 2480 pxA4 flyer210 × 297 mm2480 × 3508 pxThe formulainches × 300 = pixels needed1 inch = 25.4 mm. For an 85 mmcard: 85 ÷ 25.4 × 300 ≈ 1004 px.Add bleed on top of this size.
Pixel dimensions needed at 300 PPI for three common print sizes, before adding bleed.

A useful habit: before you place a photo in a print design, check its pixel size and divide by 300. That gives you the largest size in inches it can print sharply. A 1200 pixel wide image can only print about 4 inches (about 10 cm) wide at full quality. Enlarging it in software will not add real detail; it only makes the pixels bigger and softer.

You may also hear DPI (dots per inch). Strictly speaking, DPI describes the printer's ink dots, while PPI describes the image's pixels, but many people use the terms interchangeably.

Reading color codes: HEX, RGB and CMYK

The same blue might be written in three ways. As a HEX code it is #2563EB, which is just a compact way of writing RGB values in base 16 for websites. As RGB it is 37, 99, 235, meaning a little red light, some green light and a lot of blue light on a scale of 0 to 255. As CMYK it is written as percentages of each ink, and the exact numbers depend on the print profile used for conversion. That is why you should always convert using the profile your printer recommends instead of copying CMYK values from a random online converter.

Common mistakes

  • Designing in RGB for weeks, then converting to CMYK at the last minute.
  • Judging color on a low-quality or uncalibrated laptop screen.
  • Using an RGB-converted black for small text, which can blur at the edges. Use a single-ink black for small text.
  • Sending a brand color as a HEX code only, without a CMYK or Pantone reference.
Remember: Print colors are never identical to screen colors. Your goal is not a perfect match, it is a predictable one.

If you are building a brand palette, include screen and print values in the same document. Our guide to building a brand color palette shows how to organize that, and our flyer walkthrough covers export settings in practice.

Frequently asked questions

Should I design in RGB or CMYK?

Design in the mode of the final output. If the design is only for screens, use RGB. If it is going to a commercial printer, either start in CMYK or design in RGB and convert early so you can adjust colors before final approval.

Why does my printed design look darker than on my phone?

Phone screens are bright and backlit, and many are set to high brightness. Paper only reflects light. Also, ink spreads slightly into paper, which can darken images. Lightening dark photos slightly and printing a proof helps.

Is Pantone more expensive than CMYK?

It depends on the job. For full-color photos, CMYK is the standard and most economical choice. For a one or two color job, such as a simple logo on stationery, spot inks can be competitive. Your printer can quote both options.

Can I use a HEX code for printing?

A HEX code is a screen color, so it must be converted to CMYK or matched to a Pantone color for printing. Give your printer the CMYK or Pantone reference along with the HEX code and ask for a proof when the color matters.

Keep learning

All guides