Kerning, Tracking and Leading Explained
The three spacing controls that make text look polished: what kerning, tracking and leading mean and how to adjust each one.
7 min read
When a design looks "off" but you cannot say why, spacing is often the answer. Kerning, tracking and leading are the three controls that fix it. They are small adjustments, but they separate polished typography from default settings. This guide explains what each term means, when to adjust it and what values to start with.
Key takeaways
- Kerning adjusts the space between two specific letters.
- Tracking adjusts the space across a whole word, line or paragraph.
- Leading is the vertical space between lines of text.
- Most body text looks best with default tracking and leading around 120 to 150 percent of the font size.
Kerning: fixing awkward pairs
Kerning is the space between two individual characters. Fonts come with built-in kerning, so most pairs look fine automatically. Problems appear in large headlines and logos, where some pairs, such as AV, TA, LT or Wo, leave visible gaps because of their shapes. You fix these by hand.
How to kern a headline
- Squint at the word or turn the design upside down. Gaps and tight spots are easier to see when you do not read the letters.
- Look for pairs where the white space between letters looks uneven.
- Place the cursor between the two letters and adjust kerning in small steps.
- Aim for even visual space, not even measured distance. A round letter next to a straight letter needs a different gap than two straight letters.
In Photoshop, Illustrator and InDesign you can set kerning with Alt + arrow keys (Option on Mac) while the cursor is between letters. Set the kerning method to Optical if you want the software to compensate automatically, then fine-tune by eye.
Tracking: spacing a whole word or line
Tracking changes spacing uniformly across the selected text. It is measured in thousandths of an em, so values such as -20 or +100 are common in design software. A few guidelines:
- Large headlines: slightly tighter tracking (-10 to -30) often looks more refined.
- Body text: leave it near the default (0). The type designer already optimized it.
- Small text, labels and all-caps: loosen the tracking (+50 to +150) so letters do not crowd.
- Light text on dark backgrounds: a small increase can improve readability.
Avoid adjusting tracking inside a single word while leaving the rest of the line alone. That is the job of kerning.
Leading: the space between lines
Leading (pronounced "ledding") is the distance from one baseline to the next. The name comes from the strips of lead that early printers placed between lines of metal type. Too little leading makes lines collide, and too much makes the paragraph feel like separate sentences.
- Body text: 120 to 150 percent of the font size. For a 16 px font, that is roughly 20 to 24 px.
- Headlines: tighter, often 100 to 120 percent, because large type needs less relative space.
- Long lines: need more leading than short columns to help the eye find the next line.
- All-caps or fonts with a large x-height: may need slightly more leading.
Move the sliders to feel the difference. Wide tracking suits short uppercase labels; body text almost never needs it.
Interactive spacing demo: adjust tracking on a headline and leading on a paragraph.
Word spacing and paragraph spacing
Kerning, tracking and leading control letters and lines. Two more spacing decisions shape how a block of text feels: the space between words and the space between paragraphs.
Word spacing is usually best left at the default. The main time it causes trouble is in justified text, where the software stretches spaces to make both edges straight. In narrow columns this produces large gaps, called "rivers", that run down the paragraph. Fix them by switching to left-aligned text, widening the column or enabling hyphenation.
Paragraph spacing tells readers where one idea ends and the next begins. There are two common methods:
- Space between paragraphs: add space after each paragraph, typically half to one full line. This is the norm on websites, in emails and on most flyers.
- First-line indent: indent the first line of each paragraph by about one to two ems with no extra space. This is traditional in books and long printed documents.
Using both methods together wastes space and looks unsure. Pick one and use it consistently.
Line length and leading work together
Leading is not a fixed number. The wider the column, the more leading you need, because the eye has a longer return journey to the start of the next line. A narrow column on a flyer might look fine at 120 percent leading, while the same text in a wide website column might need 150 percent or more. If you change one, recheck the other.
Quick reference
| Control | Affects | Typical use |
|---|---|---|
| Kerning | Two characters | Fix big headlines and logos |
| Tracking | A selected range of text | Open up small caps, tighten large headings |
| Leading | Distance between lines | Set body text comfort |
Optical vs metric kerning
Design software usually offers two automatic kerning methods. Metric kerning uses the kerning pairs that the type designer built into the font. For a well-made font, this is the best choice for body text. Optical kerning ignores those built-in pairs and lets the software calculate spacing from the shapes of the letters. It can help when you mix fonts, use a font with poor built-in kerning or set large display text. A good workflow is to start with metric kerning, compare it with optical on headlines, and then fine-tune any remaining pairs by hand.
Worked example: spacing a wordmark
Logos and wordmarks are where spacing makes the biggest difference, because they are seen large and often. Letters with diagonal or overhanging shapes, such as T, A, V, W and Y, are the usual troublemakers.
- Set the word at its final size, in the final font and weight.
- Set overall tracking first. Uppercase wordmarks usually need a little extra tracking so the letters do not crowd.
- Kern problem pairs. Tighten pairs like TA and AV, where the shapes leave large gaps, and loosen any pairs that touch.
- Check at a small size. Spacing that looks right at 200 points can close up at 20 points.
- Convert to outlines for the final logo files, if the font license allows it, so the spacing cannot be lost on another computer.
Common mistakes
- Leaving a headline at default settings when two letters have clear gaps.
- Using wide tracking on lowercase body text, which makes words fall apart.
- Squeezing leading to fit more words into a box. Cut the text or enlarge the box instead.
- Ignoring spacing in logos, where a single awkward pair is very visible.
Spacing works together with size and weight to create hierarchy. Continue with how to build a type hierarchy and revisit typography basics if any of the terms above are new.
Frequently asked questions
What is the difference between kerning and tracking?
Kerning adjusts the space between one specific pair of letters. Tracking adjusts the spacing evenly across a whole word, line or paragraph. Use tracking first for overall feel, then kerning for problem pairs.
What is a good line spacing for body text?
A line spacing of about 120 to 150 percent of the font size works well for most body text. For a 16 pixel font, that is roughly 20 to 24 pixels between baselines. Wider columns and smaller x-heights usually need more.
Should I kern body text by hand?
No. Well-made fonts already include good spacing for normal reading sizes. Manual kerning is for headlines, logos and short display text where awkward gaps are visible.
Why does my all-caps text look crowded?
Capital letters are designed to sit next to lowercase letters. When every letter is a capital, the spacing feels tight. Increase the tracking slightly, often by 50 to 100 units, to give each letter room.